top of page

What to Do When Your Commercial Goods Lift Breaks Down

5 days ago
5 min read

A commercial goods lift breakdown can disrupt deliveries, affect staff and bring parts of your business to a standstill. Whether you manage a restaurant, hotel, warehouse, retail premises or commercial building, knowing what to do when a lift stops working is essential.

The most important thing is to stop using the lift, keep people away from the equipment and arrange professional assistance. Attempting to operate or repair a faulty lift can put people at risk and potentially make the problem worse.

In this guide, we explain the steps building managers should take when a commercial goods lift breaks down.


Internal structure of a goods lift

1. Stop Using the Goods Lift Immediately

If your goods lift stops unexpectedly, makes unusual noises, fails to travel correctly or displays a fault, stop using it immediately.

Do not attempt to restart the lift repeatedly or continue operating it in the hope that the problem will resolve itself.

You should:

  • Stop loading or unloading the lift.

  • Tell staff not to use the equipment.

  • Do not attempt to force doors open or close.

  • Do not interfere with safety switches, interlocks or other components.

  • Do not attempt to move the lift manually.

If the lift has stopped between floors, leave it alone and contact a competent lift engineer.

Important: Never attempt to rescue someone trapped inside a lift or carry out an emergency release unless you are specifically trained and authorised to do so, and are following the manufacturer's emergency procedures.


2. Secure the Area Around the Goods Lift

Once the lift has been taken out of use, make sure the surrounding area is safe.

A faulty goods lift can create additional hazards, particularly if doors are stuck open, the platform is not level with the floor or there is a risk of people accessing the lift shaft.

Building managers should:

  • Place clear warning signs on all landing doors and access points.

  • Prevent staff and other building users from accessing the lift.

  • Use barriers where necessary to restrict access.

  • Keep the surrounding area clear of goods, equipment and obstructions.

  • Make sure alternative routes are available for moving goods safely.

If doors or shaft access points appear damaged or insecure, treat the area as a potential safety hazard and keep people away.

Do not remove barriers or return the lift to service until it has been checked and confirmed safe by an appropriately competent person.


3. Check for Any Immediate Safety Concerns

Before reporting the fault, establish whether there are any immediate safety concerns.

For example:

  • Is anyone trapped or injured?

  • Is there smoke, a burning smell or evidence of overheating?

  • Are there unusual noises, vibration or visible damage?

  • Are lift doors stuck open?

  • Has the lift stopped between floors?

  • Is the platform uneven with the landing?

If there is an immediate danger to life, injury or fire, follow your building's emergency procedures and contact the appropriate emergency services.

Do not investigate inside the lift shaft, electrical cabinet or machinery area unless you are qualified and authorised to do so.


4. Record the Fault and Gather Information

Providing accurate information to your lift maintenance company can help the engineer understand the problem before attending.

Where it is safe to do so, record:

  • The lift location and building address.

  • The type of lift (goods lift, service lift or dumbwaiter).

  • The date and approximate time the fault occurred.

  • What the lift was doing when it stopped.

  • Any error codes or fault messages displayed.

  • Any unusual noises, smells or movement.

  • Whether the doors are opening and closing correctly.

  • Whether the lift is stuck at a particular floor.

  • Any recent incidents or previous problems.

Photographs of the display or visible damage can also be useful, provided they can be taken safely without entering restricted areas or interfering with the equipment.

The more information you can provide, the easier it may be for the engineer to prepare for the visit.


Internal chains of a goods lift

5. Contact Your Lift Maintenance Company

Once the area is secure and the fault has been recorded, contact your lift maintenance provider.

Explain what has happened and confirm whether the lift is completely out of service or presenting an immediate safety concern.

When arranging assistance, ask:

  • How quickly can an engineer attend?

  • Is an emergency call-out available?

  • Is the fault covered by your maintenance agreement?

  • Are there any additional call-out or repair charges?

  • Will replacement parts be required?

  • Can the engineer provide an estimated repair timescale?

If you do not have a maintenance agreement, contact a specialist lift company that has the appropriate experience with your type of equipment.

Avoid using general contractors or unqualified staff to investigate or repair specialist lift equipment.


6. Do Not Attempt DIY Repairs

Commercial goods lifts contain electrical, mechanical and safety systems that require specialist knowledge.

Attempting repairs without the correct training and authorisation can cause further damage and create serious safety risks.

Staff should never:

  • Bypass safety devices or door interlocks.

  • Reset electrical components without authorisation.

  • Enter the lift shaft.

  • Attempt to release brakes or move the platform.

  • Remove guards or access panels.

  • Replace components without the correct technical knowledge.

A qualified lift engineer will be able to investigate the cause of the breakdown, identify the necessary repairs and advise whether replacement parts are required.


7. Arrange for the Lift to Be Inspected Before Reuse

Once the repair has been completed, the lift should not automatically be returned to service without appropriate checks.

The lift engineer should confirm that the fault has been addressed and that the equipment is safe to operate.

Depending on the nature of the fault and work carried out, this may include checking:

  • Door operation and safety interlocks.

  • Electrical and control systems.

  • Braking and stopping functions.

  • Levelling and travel operation.

  • Safety devices and protective systems.

  • General operation under appropriate test conditions.

Building managers should obtain confirmation from the engineer that the lift can safely return to service.

If the breakdown involved a defect that may affect the lift's safe operation, further examination or testing may be necessary.

Remember that routine maintenance, repair work and a statutory LOLER thorough examination are different activities. A repair does not automatically replace a thorough examination where one is legally required.


8. Review Your Lift Maintenance Arrangements

A breakdown is a good opportunity to review whether your current maintenance arrangements are suitable for the demands placed on your equipment.

Regular preventative maintenance can help identify developing faults, reduce unexpected downtime and support the safe operation of commercial lifting equipment.

Consider the following:

  • Is the lift being maintained at suitable intervals?

  • Are recurring faults being investigated properly?

  • Are maintenance records up to date?

  • Are staff aware of what to do during a breakdown?

  • Do you have a clear emergency contact for your lift provider?

  • Are required LOLER thorough examinations being arranged separately where applicable?

A planned maintenance agreement can help building managers manage their equipment proactively rather than waiting for problems to occur.


How Can Service Lift Experts Help?

At Service Lift Experts, we provide specialist maintenance, servicing, repairs and installation for commercial goods lifts, service lifts and dumbwaiters across the UK.

We understand how disruptive lift breakdowns can be for businesses. Our experienced engineers work with building managers, facilities teams and business owners to help keep lifting equipment operating reliably.

Our services include:

  • Commercial goods lift repairs.

  • Service lift maintenance and servicing.

  • Dumbwaiter maintenance and repairs.

  • Fault finding and breakdown assistance.

  • Lift installations and replacements.

  • LOLER thorough examinations.

Whether you need assistance with an unexpected breakdown or want to put a more reliable maintenance arrangement in place, our team is here to help.


Need help with a commercial goods lift breakdown?

Contact Service Lift Experts to discuss your requirements or request a quotation.

Keep your business moving with Service Lift Experts.

 
 
 

Comments


bottom of page